Motion sensor light switch instructions

A motion sensor light control switch turns on the light in an area once it senses motion. You can override the motion control on the light switch by physically turning the off and on levers. Once the switch senses motion , the light remains on for a specific length of time as determined by the motion switch setting. Heat or light from the lamps may be turning the light control on and off. Light control is in Manual Mode.

Reposition the lamps away from the sensor ). Heat being reflected from other objects may be affecting the sensor. Turn on the circuit breaker and light switch. Explore our options with our light sensor switch , motion sensor switch , commercial lighting sensors, and more! If you use dimmable CFL or LED bulbs, look for a compatible motion detector switch , such as one of the models from Lutron.

Outdoor Safety Add an outdoor motion sensor light to your driveway or yard for added security. An outdoor motion detector light can save electricity and scare off intruders. To stop unwanted “trips,” you have to limit the “detection zone,” the area where the sensor can see moving objects.

Lutron motion sensors easily replace any switch in about minutes for hands free light control and energy savings. The motion sensor also will help to light your path at night when you come home from work. Do it yourself motion sensor installation requires that you have the proper materials and tools. Motion sensor light instructions will make the job easier. Following the manufacturer’s instructions , attach the base of the new light in the same location as the old light fixture.

Step Attach the mounting strap of the new outdoor motion sensor light. Mounting an outdoor motion sensor light to your home can help you feel safer, as your outdoor space will light up whenever someone approaches your house. Step back from the sensor to avoid changing ambient light levels in the room. The sensor white wire will connect to the neutral wire (white) in the wallbox. If you turn the switch off and on within a second or so, the light will stay on, and this overrides motion detection.

To go back to normal operation, turn the switch off and wait ~seconds, then turn back on. Personal Security Motion Sensor with Remote User Manual Do not use in wet locations. : Low Battery Indicator. INSTALLATION INSTRUCTION Motion Sensor MS-1WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing.

System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations. Set a motion sensor light by turning the head of the light in the direction of your choice, then set the “On-time” switch to “Test” before adjusting the range. Walk in front of the light several times, and readjust the range frequently until its at your desired level. Once the dusk-to-dawn sensor detects light , the manual “ON” mode will automatically go back to its original settings of the AUTO motion sensor mode. At any point while in manual “ON” mode, return to the AUTO motion sensor mode by toggling the wall light switch OFF and ON again within seconds.

Automatically turns lighting off. Photocell keeps the lighting off during daylight hours. If you are experiencing issues with your solar motion light , please try the reset procedures below before contacting our customer support department.

LED indicates motion was sensed (day or night). Buy now and get the fastest delivery from Topgreener. Installation Instructions.

Point the motion sensor at the center of the area you want the light to cover. The 100SA1Passive Infrared Sensor (PIR) is a stand alone motion sensor suitable for automatic switching of security applications in domestic, commercial or industrial premises. When movement of heat source (i.e. person, dog or car) within PIR zone is detected by the sensor , it automatically switches on the light or other connected load.

Note: If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done. TESTING AND ADJUSTMENTS 1. The WIR-10-SR-C-D Occupancy Sensing Wall Switch is a Passive Infrared (PIR) motion sensing light -ing control and conventional Wall Switch all-in-one, used for energy savings and convenience.

When the sensor detects motion , the Floodlight will automatically turn on. The built-in light sensor turns the sensor off and on according to the light and time level set by the LUX and TIME. Hi, I just installed a IPSMotion Detection single pole switch to detect motion and turn on the lights in my Garage. The switch works fine in the manual mode and the light in the motion detector flashes green every few seconds, yet the lights will not go on? If your lights are on a timer and using an old style incandescent light bulbs which gives off heat it may cause a false alarm when it turns on and heats up if it’s to close to the sensor.

This is not a Motion Sensor. Sensor Sensitivity: Each motion sensor has a sensitivity switch under the battery, low medium and high.