Minwax poly stain

It can also be used over polyurethane finishes, so you can change the color of your finished woo without removing the existing finish. There’s no stripping or heavy sanding necessary to remove the old finish! Follow directions for application and dry times. Stir to rotate the product from the bottom to the top of the can. Shop minwax polyshades espresso oil-based interior stain.

Rich stain color and long-lasting polyurethane protection combine to enhance wood grain in one easy step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. Showing of 3 that match your query. It comes in traditional wood tones and contemporary decorative colours.

Find quality polyurethanes online or in store. It penetrates deep into the pores to seal and protect the wood. I have been finishing wood projects for over years and this is the first. Tips For One-Step Polyshades.

Minwax All Stains See All. I only did one coat since these will never be touched. It is recommended for interior wood surfaces such as furniture, molding, doors and cabinets. I’ve just finished constructing a kitchen island from Maple plywood and Maple hardwood. Shop Menards and complete your project in one-step with our selection of polyurethane and stain all-in-one.

The final step (after letting the stain dry) was to add a coat of polyurethane. Home Depot How To Community Member, Briana, asked for help staining her crib. This three-minute video shows step-by-step instructions for applying stain -and- polyurethane in one. Dry time is affected by your ventilation, temperature.

If you stain tomorrow, you should be good to go for finishing by Friday, at the latest. As for a finish, you have a couple of choices. Spray lacquer or polyurethane.

Self-leveling formula provides superior scuff scratch and stain resistance. Shop our selection of null in the Department at The Home Depot. Dry Interior Wood Stain (2-Pack Based Interior Polyurethane (2-Pack). Fill Your Cart With Color today! Stain the wood with your choice of color.

I have used it many times before and knew the stain color would be perfect! The more coats you put on, the darker the color. Oil-based products contain mineral spirits, and for them I reach for a natural bristle brush. Oil-Based Stains and Finishes. These brushes are designed to carry a lot of stain from the can to your project, and hold up much better than foam brushes.

Two coats brushed on with a natural bristle brush gave both my stain and the wood itself the protection they need. Polyshades is a combination wood stain and polyurethane finish, allowing you to get both color and protection in one easy step. It is an ideal choice for those who want to save the time involved in staining with one product and protecting with another. Polyurethane clear-coat is essentially a plastic that is applied as a liquid and dries as a solid plastic sheet. It gives long lasting protection and beauty to floors in a super fast-drying, easy to apply formula that levels to a smooth, even sheen.

The Best Tools for the Lowest Prices. I like the watco danish oil first and then a few coats of the minwax poly. I used watco wipe on poly recently and the finish seemed softer and the dry time was a bit longer. She ended up trying to stain it with the all in one and it turned out fine. It works in such a way that the coast of poly add a light amount of color, so you get a fair amount more color control from the stain straight from the can than you do just plain stain.

Multiple coats darken it, and you can add regular poly at the end to add protection. Polyshades has polyurethane in it, and with thick coats it could slow the drying time down combined with other things listed below. How To Prevent Common Wood Staining Problems with Expert Bruce Johnson.

Allows you to change the color of already-finished wood without removing the existing finish. I followed that up with minwax natural 2stain then proceeded to apply a coat of minwax fast drying poly semi-gloss. This is where the problem comes in. My main issue is that as the poly dried it resulted in white spots appearing everywhere and white residue in the grain of the wood. Use Duraseal instead as it comes out dark, the stain is better quality and it dries faster.

If you don’t want to do this, then you could try putting in a bit of a tint on the 3rd coat of poly to make it a tad darker (assuming you are putting on coats of poly ). The stain weakens the poly a bit, so only tint it a. This product has a great concept but the polyurethane and stain never stayed completely mixe it kept seperating in the can. Jon recommends it for those small jobs around the house. An each time you san you remove some of the finish.

So, sanding is not recommended except before the final coat. One step stain and polyurethane finishes for wood have become popular in recent years. The ease of application and quick finish time have made this a high demand product among woodworkers.

The limited number of available colors in the stain is a major downfall, but a person can mix the stain and polyurethane himself to get the shade he wants.