Water based lacquer

Deft Interior Water -Based Clear Wood Finish Gloss Spray, 11. Ounce Aerosol by Deft Inc. This novel formula produces a smaller and smoother polymer particle, which translates into a big increase in film clarity. This dramatically reduces the cost of restorations and refurbishing of existing surfaces as the work can be done on site with minimal disruptions to the premises.

Water based lacquer s are used extensively in wood furniture finishing as well. It is great for on-site refinishing and repairs. I have a question on spraying water based lacquers.

I know that with solvent based lacquers that the after the first coat the subsequent coats dissolve into the first coat and then build up the thickness of the lacquer. Water-based topcoats over oil stains? Lacquer over polyurethane? This product can actually be used on wooden floors.

Solid pieces of lacquer falling into the finish from the lip of the can dissolve back into the finish. But this doesn’t happen with water-based finishes. Also, water-based finishes can sometimes coagulate a little in the can. Always strain water-based finishes.

Anyone have success using an airless? What tip,what pressure and what primer did you use? Water - based nail polish to the water - based materials,the texture is more. Did you lay them flat or not?

Superior to solvent based lacquers in hardness, stack times and resistance to lacquer thinner and fingernail polish remover. I’ve sprayed shellac, water based dye, and Deft brushing lacquer , all with good. I woulsd like to get into spraying more lacquer because its looks great and dries fast, but all the options out there are confusing to someone new to spraying, like me.

VOC, water - based wood finishes for the fine furniture, architectural and general woodworking industries. Each water - based product is its own animal. Rather than be concerned with what resin is inside the globule of water - based finish you only need to know certain properties of that particular finish.

This video shows Andy spraying a water based hardened lacquer (suitable for flooring) to a pine dining table. Residential or Commercial. These kinds of finishes are not only less toxic, but are also more durable than some solvent- based ones. To get the benefits of water - based lacquer with the depth of finish of the solvent- based finishes, I use water - based lacquers over a washcoat of shellac.

Suitable for spray or curtain coater application to furniture and fittings. Low odour, non-yellowing, hard wearing and scratch resistant. Conforms to European Standard EN71: Part Coating of Toys for Children. Seems like Target water based lacquer is a good choice but only available on line from Woodessence. They also have water based de-waxed shellac.

What water based lacquers would you recommend ? The same chemistry is used to make clear water based or water borne lacquer. CIC water based conversion coating Showcase By: Eric Reason. Eric is a furniture maker in Nashville Tennessee He contacted me some years ago after seeing my Blog with and interest in trying out the cic conversion coatings products I had talked about so much. A water - based finish is typically made with either an acrylic resin ( water - based lacquer ) or an acrylic urethane (sold as water - based polyurethane).

A water based wood stain (though tricky to apply) is quick drying, low VOC, and has a low odor. General Finishes Corporation SECTION 1: Material Identification. This is a waterborne 1acrylic finish that dries to the touch in just minutes. It has very little odor, cleans up with soap and water and boasts the performance of lacquer in a water - based acrylic formula.

Goes on crystal clear and will not yellow over time. Application is easy with a brush, pa roller or spray gun. Water -borne finishes are) often called lacquer , shellac or varnish for marketing reasons.

It makes an entirely new type of finish seem familiar. This interchangeability of names adds to the confusion about finishes. Acrylics can sometimes be dissolved enough with lacquer thinner to flow out the foam, but at other times, especially with water-based polyurethane, you usually have to remove the foam-laden coat and start over.

Other finishing products take hours to dry properly. The best choice is to apply the lacquer on a warmer day. If the lacquer has already blushe try bringing the piece into a warmer space or applying another coat.

Learn how to make and keep wood beautiful at each step of your wood finishing project. They’re great all-around coatings, and each new generation of materials gets better.