Minwax wipe on poly

Applied with a cloth – no need to worry about drips and brush marks. Great for furniture, railings and trim. I used watco wipe on poly recently and the finish seemed softer and the dry time was a bit longer. A durable, clear finish that combines polyurethane protection with classic, hand-rubbed beauty. All with the convenience of a water-based finish.

Polyurethane formula combines protection with classic, hand-rubbed beauty. Wipe - On Poly is great for applying quick coats without the need for a brush. If your wood will be exposed to the elements outdoors, use Helmsman Spar Urethane , which blocks sunlight, water, and temperature changes.

I like to use the Minwax brand. I spread it around and rubbed it in the wood using a clean, soft cloth, waited five minutes, then. Easy High Gloss Finish for Rifle Stocks. Guys here is a link to help keep my channel going.

Wipe-On Poly is great for applying quick coats without the need for a brush. This type of finish is ideal for a piece that may experience a lot of wear and tear inside your home. I was excited to try this stuff when I first saw it on the internet. Here is how I apply wipe - on poly to my woodworking projects.

Like other oil-based coatings, it adds a slight amber color to the finish. A minute less on how to apply a simple, wipe on finish to wood. I just purchased some wipe on poly , Minwax bran and naturally the directions say use a lint free rag.

If you are not concerned about yellowing of the surface, polyurethane is the best option. The Minwax website says to sand off all of the wax before applying poly , but am wondering if I really need to do so, or can just apply the wipe on poly over the wax. No streaks, no runs, no brush hairs, just a smooth beautiful look. Minwax is the most common brand of oil-based wipe-on poly.

Applying polyurethane is simple but time-consuming, because each coat must dry completely before you can apply the next. Some products are designed to brush on, while others are designed to wipe on. I just bought some gloss wipe-on poly for my windsor chair project and put a thin coat on last night. After the roll-on coats are dry, I use minwax wipe on poly (use the same sheen you chose for the roll- on poly ) for the face frames, legs, doors or any other narrow, small or intricate areas. I do this after the large areas are dry so I don’t smudge adjacent areas.

Penetrates wood and provides excellent water resistance. Just wipe it on with a cloth, no need to worry about drips or brush marks. Showing 1of 1 that match your query.

Jon recommends it for those small jobs around the house. I am not a big fan of Minwax product but see link for different opinion. I remember the first time I used it. An oil-based polyurethane finish that provides a thin, durable layer of protection for interior wood. Protects wood against water, household chemicals, food stains, and wear.

Here is a video from Minwax that shows both finishes in action:. There is no standard answer when. Enroll For A Military Discount! Trays and Liners For Your Next Job.

The author tested wipe-on finishes, including a water-based finish and both tung-oil and linseed-oil-based finishes. All the finishes were tested on pieces of red-oak plywood cut from the. If you really want a lovely finish, After the third coat use steel wool and rub the surface thoroughly and then use minwax wipe on poly with a clean rag. I use that often to even out the sheen and also remove any slight blemishes in the finish. One thing though, it will take a while for the poly to cure.

I bought some but picked up gloss by mistake. Minwax Wipe on Poly is often recommended as a sealant. When I went back to get satin, I realised that the product sold in Bunnings (Australia) is oil based.

The Minwax product is (or was) the highest solids product among the wiping varnishes, so it will build pretty rapidly, though not as rapidly as the high-test version with twice the solids. You may use it as its own sanding sealer on the lathe, if you care to. Provides a hand rubbed look with polyurethane protection and ambers less than other polyurethanes.

Do not follow the directions on the Video. They are for Minwax Tung Oil Finish. You will see that the application technique is more of a rub-on than wipe -on process.

Varathane Crystal Clear Poly goes on a little milky, but dries clear and stays clear!