Scraping off popcorn ceiling

Scrape the Ceiling Slowly remove the popcorn coating from the drywall with a wide drywall scraper , working one section at a time. Before you go to all the trouble of prepping the room, try scraping a small area while learning how to remove popcorn ceiling. Try it dry first, then dampen the texture with water and try again. Some texture comes off easily without water, but in most cases wetting is best. The scraping is relatively easy if you have a popcorn ceiling that hasn’t been painted numerous times.

The hard part is looking up for an hour and also finessing the joint compound to look smooth. But, if you can ice a cake, you can do this! Be sure to turn off the power to any light fixture before.

Also, acoustic ceilings were done for the purpose of soun it served as insulation, was thought to be attracive, hid flaws in workmanship and so forth. Walls and ceilings is difficult to active, and texture coating walls and ceilings that have had acoustic removed is an inexpensive alternative. Knowing it would be so much easier to haul out the scraped off popcorn ceilings when we rolled up the carpet, we started on the ceilings first.

Instead of removing it, you can cover it up with different ceiling materials. You get an updated look with less work and less mess. The popcorn ceiling had been painted at least once so rather than trying to remove it right down to the drywall, I just scraped the popcorn off and left the texture on the ceiling.

A coat of primer and then a coat of satin paint makes the ceiling look really nice and modern. Ceiling Texture Scraper for Popcorn Ceiling Removal is rated 2. Lightweight ceiling -grade gypsum board attached to the existing ceiling as is (leave the popcorn be) would work fine. Unless you have nothing better to do than stand on a ladder scraping.

Use a joint knife to gently scrape off the popcorn texture on the ceiling. Make sure that you have dulled the joint knife so that it does not gouge your ceiling and cause you more problems in the future. The water should soften the texture enough that the popcorn to pops off easily when you scrape it. In all of our renovation homes the first thing to come down is the popcorn. All I did was wet down the ceiling and then use the nozzle to scrape the popcorn off the ceiling which was then sucked into the vacuum.

No mess on the floor, no dust, and the stuff was contained. Took only about minutes to pull everything off of the ceiling of a 15xfamily room. But you want the solution to soak in. When done properly, the putty knife just slides across the ceiling , and it is easy to scrape the popcorn off.

Your time may be longer depending on age, amount and type of paint and total styrofoam content of the popcorn. With a smooth motion, scrape the ceiling with the scraper. If you’re tired of your ceiling looking like cottage cheese, it might be time to scrape off the popcorn texture. Thankfully, you don’t need to hire an expensive contractor for the project.

The Benefits of DIY Popcorn Ceiling Removal. Popcorn ceiling removal is messy and time-consuming, so it isn’t for the faint of heart. The main way to remove a popcorn ceiling is by scraping it off. If you’ve ever removed wall paper before, you’ll have an idea of what a job like this will take.

This method involves wetting down the ceiling with water and then hand- scraping off the popcorn texture. Anybody have any new ideas how to get painted popcorn texture off the ceiling ? The bedroom ceiling had a popcorn ceiling covering up the holes, which I found out after scraping all the popcorn off. The Dinning Room had holes, one from the light fixture being move and the other from a wood burning stove pipe that had been removed.

Removing popcorn ceilings is MUCH more satisfying than. A popcorn ceiling scraper like this which will catch all the mess for you. If you have a painted popcorn ceiling , like two of mine, you will need an extra step in here. In order for the water to reach the actual popcorn , you will have to expose the material. After the bond has broken, you’re going to use a putty knife to scrape it off.

I’d recommend this inch scraper , but it can also be done with a 6″ putty scraper (but it will just take longer). Usually, the popcorn ceiling just peels off very easily (if it doesn’t, you’ll just want to apply more warm water). Step – Scrape the Popcorn Wait a moment for the water to soak in.

With unpainted texture, the most common approach is to mist it with a spray bottle and scrape off the softened texture. I started scraping the popcorn off my kitchen ceiling. Two weeks, bleeding knuckles, and one dust-covered house later, it was finished.

It looks fantastic no, but it is the one DIY project I pledge never to do again. IF you consider scraping popcorn ceilings fun. To make scraping off the popcorn texture easier, experts suggest lightly misting the ceiling with a garden pump sprayer. Work in small 4-inch-by-4-inch sections and let the water soak in for about.

Do not scrape too hard to. Scraping a popcorn ceiling is not for the weak. After removing the popcorn , the ceiling should be sanded and bad seams and the dings need to be topped off After topping off and sanding, it is wise to prime the ceiling before trying to roll on texture.

Once the whole ceiling is scraped down to a semi smooth surface, clean up all the soggy debris and let the ceiling dry. Learn how to safely and cleanly remove a textured popcorn ceiling , even if the material contains asbestos and lead-based paint. Scrape the Popcorn Material off the Ceiling Round off the corners of a joint knife (to prevent gouges) and use it to scrape off the popcorn ceiling.

If you run into any hard scraping areas, apply a little more water, wait and then try again.