Tongue oil for wood

It resists marring, penetrates well, and is environmentally friendly. Tung oil or China wood oil is a drying oil obtained by pressing the seed from the nut of the tung tree (Vernicia fordii). Tung oil hardens upon exposure to air, and the resulting coating is transparent and has a deep, almost wet look. Tung Oil as a Woodworking Finish What it is.

Easy to maintain, it is the ideal protective finish for woods that have been refinished because it penetrates wood pores to restore vitality to dry, thirsty wood. When tung oil is not thinne in other words, its 1 tung oil , it’s a non-toxic finish. Meaning it’s an ideal wood surface that can come in contact with food.

I also found some references to using tung oil for medicinal purposes in ancient history. Tung oil can be applied on the wood surface using a normal piece of cloth whereas polyurethane has to be applied using a sponge or paint brush. Tung oil makes the wood look granular and grainy by enhancing the natural grain of wood. Tung oil dries a little bit faster than linseed oil , and sometimes it is modified to cure even more quickly.

To apply an oil finish, flood it onto the wood , adding extra to keep the surface wet in areas where the oil is quickly absorbed. It is easy to apply and easy to rub into the wood. Tung oil is a non-toxic finish and it is applied on furniture that handle food such as wood cutting boards and salad bowls.

The advantages of tung oil are that it is waterproof for one. It is flexible in that it still protects the wood as it expands or contracts. Tung oil finish is accepted more than pure tung oil because this thinner version of the oil and it penetrates into the wood pores quickly.

Once the product on which this oil dries, you are left with 1 pure tung oil. It produces one of the most attractive wood finishes you can get, but it also takes a long time to apply, with more work involved. Tung oil finishes are usually applied to unfinished wood , but they can be used over oil based stains. Other types of existing finishes, such as varnish, must be remove as tung oil is a penetrating oil. In this video I compare some common Oil Finishes.

How do they look on wood ? Can you build a film finish with boiled linseed oil , tung oil , danish oil , tru oil ? Music: Corncob Kevin MacLeod. Find quality wood oils online or in store. Tung oil is used as a finish for new or antique furniture to achieve a hand-rubbed look. A tung oil or Chinawood oil finish is usually applied to unfinished wood , but works just as well over a wood stain.

Tung oil has a warm, amber color that gives wood a classic hand-finished look. The primary differences between linseed oil and tung oil are as follows: Linseed oil “yellows” more than tung oil. That is, it turns more orange as it ages.

Boiled linseed oil cures faster than tung oil , overnight in a warm room when all the excess is wiped off, as opposed to two or three days for tung oil. Tung oil is extracted from the seeds of the tung tree, which is native to China and also grows in other parts of Asia. The practice of using tung oil for wood goes back hundreds of years, especially in finishing and sealing the wood on boats. There are even mentions of tung oil appearing in the writings of Confucius in around 4B. For these reasons, it is also sometimes referred to as “China wood oil.

Pure tung oil is considered a drying oil much like linsee safflower, poppy and soybean oil and is known to have a slightly golden tint. Danish oil , which is yet another natural finish, is actually a type of Tung oil. Although it is also known as Chinese wood oil or linseed oil , it is definitely different from the latter. It is, in fact, a mixture of many different resins and oils and sometimes, other solvents. There’s a lot of confusion about how, when and where to use wood oils.

Our buff-in, color-infused tung oil enhances the color of wood , while providing a protective matte finish. Our shades are easy to maintain, low odor and VOC compliant in all states. Products, 90-Day Guarantee. Fast drying formula provides superior protection against moisture and penetrates deeply into the surface of stained or unfinished wood for a genuine, hand rubbed finish. When the installer installed our oak hardwood floor he put several coats of tung oil on it.

He advised us tung oil would be better than urethane because we have dogs and the scratches their nails leave (and I clip the nails regularly, I’m a dog groomer)could be erased by rubbing the scratch with a cloth dipped in tung oil. Pure tung oil forms a tough, all-natural oil finish that seals out water, and is completely unaffected by alcohol or acetone. It penetrates deep into wood pores, sealing the surface and creating a smooth, satiny sheen.

The beauty of finishing floors with tung oil is that those scratches and dents seem to recede into the imperfections and variations of the wood. Because the tung oil is absorbed into the wood , you aren’t chipping or scratching a finish, so it’s not as noticeable to begin with. Tried and true, tung oil has served to protect and beautify wood products for centuries. Hand-rubbe oil -based finish goes on in minutes. Ideal for refinishing because it soaks into parched pores and restores the wood.

Tung oil builds quickly, consolidates the wood surface and builds a transparent matte finish. Tung oil does not expire, but it can thicken somwhat over a long period of time. Shop minwax 16-fl oz tung oil in the wood oils section of Lowes.

Skip to main content Skip to main navigation.