Thursday, November 12, 2015

How to paint stained furniture

How to paint stained furniture

Yes, you can paint over stained wood. In fact, there are numerous correct ways to paint stained wood and the method you choose should depend on the type of stain use the state of the woo and whether or not you’re painting a piece of furniture or some other structure. Ok, well, that is not entirely true.


Improve a less-than-stellar piece with paint , patience, and these smart tricks. Follow these easy instructions for how to prep and paint wood furniture for beautiful. Use a good quality primer first.


Someone mentioned Kilz, another good brand is Zinsser. If you want to re stain them you will have to get the varnish off first. Either by a stripper or sanding or both. SURE both coats of paint are DRY! You will need a foam roller or a large, angled brush (at least inch wide) for the large, flat areas of your piece.


I always like to use a stain blocking primer on old furniture to make sure the previous stain and or poly finish does not change the color of the paint. I only use polyurethane on colored paint or stain. For white furniture , I either allow it to cure.


ALL THE PRODUCTS YOU NEED CAN BE FOUND HERE! If you used a latex-based paint with a flat finish over the original stained surface, you should follow with a clear polyurethane or compatible water-based sealer, since flat latex paint does not. Heather I just stripped a dresser that was stained and sealed. I used paint thinner and denatured. Many individuals make the mistake of leaving wet and freshly finished outdoor furniture outside while drying.


How to paint stained furniture

This often in dirt and debris being dried into the paint or stain. To prevent unwanted debris from making contact with the finish, it is wise to allow the finish to dry to a tacky texture and move indoors (such as a shed or garage). Add a bit of antiquity to furniture with a limed finish using lime wax or white shoe polish. This effect can be used on both stained and painted pieces.


All you need to invest is a little of your time and a few dollars on some supplies and equipment, and your furniture could look brand new instantly. Let the paint dry completely, and you are ready to use your transformed furniture. This is the bed after a new coat of paint. I added pink and green scrolls to the headboard for some girly fun.


I chose your sight to research “ painting a stained. This post contains affiliate links for convenience. You can see my full disclosure here.


You don’t want that ending up in your stain and varnish. Now that the old stain or paint is off, it’s time to stain your furniture. Seeing the rich color come alive back into wood that looked pretty awful is very rewarding.


How to paint stained furniture

I have to admit, I love staining! Plus, stain just lasts longer than paint. The process itself is relatively simple, requiring just a few basic tools and supplies. Carefully sand the furniture and repair any blemishes in it, then take your time applying several thin coats of primer and paint.


If you prefer to paint the top, rather than stain the top, you can follow the same instructions for. But just like with painting , there are some rules and guidelines that should be followed to make sure that your staining project turns out perfect. A foam or bristle brush will do fine, but you can also use a cloth dipped in stain to color your teak furniture. I am not going to go into too much depth on how to paint the furniture (see our tutorial on that here), but I do want to touch on the differences with this piece.


Getting under those layers of old paint might reveal a valuable piece of furniture. Paint on a layer of stain. Once the stain dries, any additional stain. Stir your stain with a stir stick, and then dip your cloth in. Apply the stain in a long sweeping motion along the piece of furniture.


Stain : Now it’s time to stain ! The thicker the layer you apply, and the longer you leave it on before wiping, the darker your stain will be. Here are the steps for how to paint over stained wood properly. It’s in great shape and you even have the perfect spot picked out.


Once you have decided on your wood stain or paint base coat, apply the crackle finish directly on the surface. If you are changing the look with a new base color, treat your furniture to a new coat and wait until it is completely dry before applying crackle finish. Learn how to refinish wood furniture by yourself.


Although glazing furniture is our usual forte around here, we also use paint and stain to antique wood when we are looking for a more roughed-up look. I found a cool crate a few weeks ago, but it was $40. Choose the Right Finish: Just as a long-sleeved shirt provides protection from sunburn, multiple coats of an exterior finish help protect furniture from UV rays as well as moisture. Since paint blocks UV rays better than a clear finish, your best bet is to apply a quality exterior primer, topped by a exterior latex or oil-based paint.


Hundreds of Discount Handpainted Items to Choose From. Look Up Quick Now!

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Popular Posts