Rosco foam coat

It provides a har durable finish that resists chipping and cracking, yet can be sanded smooth or carved to add detailing. Authored by Rosco’s expert product and market managers,. We want to say thank you to all of our loyal Spectrum readers! It is mostly for indoor use, but can be sealed for outdoor use. Just mix with water and brush, trowel, or spray on with a hopper gun.

An ideal substitute for joint compound or plaster, it is water-based and non-toxic. FOAMCOAT is a non-toxic, water based coating for styrofoam and polystyrene foam, as well as other surfaces. It can also be used to seal primed woo concrete block, primed fiberglass, papier mâché, muslin and many other surfaces.

FoaAll surfaces should be clean and dry before application. For particularly difficult materials, lightly sand surface to give it more tooth before applying FOAMCOAT. Norcostco is an authorized Rosco dealer. Foamcoat is a non-toxic, water based coating for styrofoam and polystyrene foam, as well as other surfaces.

The Winner Of The Rosco Gobo Contest. The sculpture was then treated with Rosco Off Broadway Paint to age it and give it a terra cotta feel. Dollar-for-dollar, our Foam Coat covers 4x as much as Rosco Foam Coat , is at least as strong, and has a longer shelf life. FoamCoat is flame retardant and water resistant. Javascript is disabled on your browser.

Your one stop shop for all your lighting and theatrical needs. Rosco FlexCoat is a non-toxic, water based coating for polyurethane foam , Styrofoam and ethafoam, as well as other surfaces. FOAMCOAT by Rosco is a non-toxic, water based coating for styrofoam and polystyrene foam , as well as other surfaces.

A water base non-toxic, flame retardant protective coating. Excellent for use as a protective coating for all types of foam projects. Especially useful on foam scenery or props that receive physical abuse or need to last for extended tours. Rosco ’s Foam Coat – This comes in gallon or 3. For testing, I really didn’t want to buy a full gallon, but that was the smallest size available.

Free lighting advice and many items ship free! Foamcoat goes on a little like joint compoun and creates a hard but flexible coating. Foamcoat dries to a very hard durable coating that resists chipping and cracking, yet can be sanded smooth or carved with detailing.

Rosco Foamcoat is a water base flame retardant protective coating for all rigid foams. With its super adhesion, Rosco FlexBond can be used to laminate blocks of foam together. Inherintly fire resistant.

Foam Coat is a rock-hard coating that protects and beautifies your foam projects. Can be used outdoors when sealed with any outdoor paint, or mixed with Boost liquid fortifier, or Bounce liquid rubberizer. An easy way to color Rosco Foam coat is to use Concrete Coloring Powder, or you can simply paint it.

Sponsored Links Remove Advertisements. Rosco foam coat is one and so is the foam factory one , however they are not a hard coat like you want they will break down eventually they are not like a two part epoxy styrofoam coating. Its 1 acrylic formulation provides excellent adhesion to a wide variety of substrates.

MIXING: Mix in a clean container with clean water. Speicialized coating for foam that dries to a hard durable finish. Rosco Tough Prime: Covers just about any surface, including PVC pipe, aluminum, foams and plastics as well as muslin, wood and foam core.

This is a quick drying, acrylic primer which dries to a tough, durable coating which can be painted over with any paint and is excellent for both interior and exterior use. Flexcoat (Gallon ) FlexCoat is a non-toxic, water based coating for polyurethane foam , styrofoam and ethafoam, as well as other surfaces. It will not become brittle with agae or exterior exposure. Extend the drying time by adding up to latex paint with your water before mixing into the dry foam coat. Flexcoat is a water-based coating for polyurethane foam , Styrofoam and ethafoam.

Useful on foam scenery and props which must endure rough handling. Rosco “Foam Coat ” is the most widely used product in this category. Sculptural Arts makes a “Sculpt-or- Coat ” than can be used similarly.

The two products are of very similar price. Want to coat EPS, XPS or Polyurethane foams? Here are the products that you can use to make your next foam project.

Different textures, rigidness or flexibility can be achieved with different additives.