Plus 3 joint compound

Joint Compound features good open time and less shrinkage. It also sands with the ease of a topping compound and bonds like a taping compound. Factors not covered in this publication may also affect the finished appearance of any surface. PRODUCT DATA Type: A ready-mix drying type joint compound. Use: Hand or mechanical tool application.

Coverage: Approximately 9. The Drywall Doctor assumes no. Joint compound is used for embedding paper tape,. Extinguishing Media: Water or use extinguishing media appropriate for surrounding fire. Easy to apply and sand lightweight joint compound featuring professiona l grade attributes. This product is not expected to produce any unusual hazards during normal use.

Also for hand-applying simple textures. USG makes all purpose for taping, Topping for coating and finshing or Plus which can be used for all 3. They have -taping muds, 4-coating muds, and 4-finshing muds. A high performance compound that conceals and levels well over fasteners, beads, and trims with minimal shrinkage.

Other measures are usually not necessary, however if conditions warrant, contact physician. Eyes In case of contact, do not rub or scratch your eyes. PLUS joint compound with dust control is compatible with all other USG joint compounds so it can be used just for the joint finishing coats that will be sanded. Watch this video to find out more.

WATER REAGENT ULTRA PURE GRADE MSDS. Special Notice: Our database is made up of both MSDS and SDS. Sheetrock Plus is available at The Home Depot stores. Features good open time and less shrinkage. Requiring one fewer coat over fasteners and bea it eliminates the need for taping and topping compounds.

Apply joint compound to the inside edges of the hole and the outside area of the patch. Moisten the back of the patch with a damp rag. Feather this dry, without adding joint compound to the face yet.

For embedding the tape and the subsequent layers, buy lightweight, all-purpose joint compound in the familiar (and ever-so-useful) 5-gallon bucket. It is used for embedding and finishing as well as simple hand-applied texturing. Green Top All Purpose, Lightweight Plus Blue Top, Mid weight Purple and Ultra light Green. I know the Green all purpose dries harder, sticks better and sands to a nice finish then Plus , but it is heavy and harder to sand and shrinks more(?). I have skimmed with a durobond (easy sand) type product.

If you do that I would lightly sand before final skim. I would use a light weight joint compound for final coat, there is less shrinkage and a lot easier to sand. I recommend National Gypsum Multi-Use (red lid) but if all you can get is USG Plus (blue lid), use that. By DAP Add To Cart There is a problem adding to cart.

This coat should be smooth and the edges feathered approximately in. Coat all inside corners with at least two coats of compound with the edges feathered out. Skip to the end of the images gallery. When USG first started selling joint compound in a box I thought it was a good idea, no more piles of buckets to deal with, or guilt sending them to a landfill.

Heck I even had what I thought was a clean and quick way of transferring the mud from the bag to a bucket. Eliminates the need for separate taping and topping compounds. Bonds like taping compound and sands like a topping compound. Weighs less than conventional compounds and requires only coats over metal fasteners, corner bea and trim.

Because the walls are an old school material its very hard to get modern materials like joint compound with its glue and talc to bond with the older natural material that hardened over time by an air drying and absortion of CO2. Step – Once your first coat has dried use your putty knife to scrape off any bumps or ridges. Apply the second coat of mud with a wider stroke than the first.

Ready-mixe offers all of the benefits of a conventional-weight all purpose joint compound. PluS lightweight all purpose joint compound also sands more easily than any other compound , using only 150-grit sandpaper or 220-grit abrasive mesh cloth. It needs only minimal mixing, thinning or retempering.

Suggested site content and search history menu. Completely gutted the whole thing and finished putting new drywall up. Used the Home Depot lightweight dust control joint compound and now I am screwed.

Its consistency is a little sticky. The compound went on nice but dried in a weird way.