Wednesday, January 22, 2020

High temp ice and water shield

High temp ice and water shield

It is an environmentally conscious solution that provides both confidence and design flexibility. High temperature resistance — Designed to withstand high temperature applications, up to 260°F (127°C). ALCO Shield HT protects roof structures, roof assemblies and the building interior from water penetration caused by ice dams, pooling water and wind driven rain.


Helps keep water and ice out of the most vulnerable areas of your asphalt shingle or metal roof. The high - temperature compound is suitable for most metal roofing. The self-adhering qualities of WIP underlayments reduce labor costs and installation times while providing increased protection compared to that of typical felt roofing underlayments. Consider the design and slope of the roof, combined with your personal preference. Start your roofing project right with the proper underlayment.


Choose from a wide variety of felt and synthetics. Seals the roof against infiltration of water. Mid-States Asphalt manufactures and distributes a. One person can install long lengths of ice and water shield to the roof, however it is easier for two people to install, especially with some new installation tricks. SELF-ADHERED ICE AND WATER PROTECTION UNDERLAYMENT.


In addition, ice and water shield does not breath, and has been known to cause serious deck degradation. Providing a skid-resistant surface, nail resealability, high temperature resistance, corrosion protection, weatherproofing during installation and more, CLAD-GARD is a smart way to. QUIK-Stick IWS is a highly versatile underlayment that provides superior waterproof integrity and is an excellent second wall of defense against wind driven rain and seepage due to ice damming. This High Temperature roofing underlayment has a thermal stability up to 2degrees Fahrenheit. Designed specifically for high - temperature applications of metal roof installations, it will resist temperatures up to 250° without degradation of the adhesive, and self-seals.


Ice and water shield is designed to stop Ice dams, so I think using it on the first three feet of the roof is a good idea. Further up seems like a waste of time and money imho. For a better roof how about using one of the newer roofing underlayments. Code Compliance and Risk Reduction: Protection against ice dams is required by most building codes at eaves wherever the January average temperature is 25°F (°C) or lower or where there is a possibility of ice forming in the eaves — i. Polystick IR-Xe, is a homogeneous rubberized asphalt waterproofing compoun fiberglass reinforce with an aggregate surface for skid resistance for use in ice and water - shield applications. The rubberized asphalt seals around correctly installed nails on the weathering surface.


The Ultimate Shield for Your Roof’s Defense. Store rolls at room temperature. Prolonged exposure to elevated temperatures may reduce the adhesive characteristics of the membrane. Install MS3only when material interface temperatures (air, deck, material) are 40° F and rising.


Metal Roofing Underlayments for High Temperature. Is ice and water sheild needed with a metal roof? The SBS can actually flow under high. Do not double stack pallets.


High temp ice and water shield

CCW WIP R CCW WIP 403HR (Heat Resistant) Roofing at rroof substrates against water penetration caused by wind drivbe. The high per-fvresists softening and flow at the high in-serres fn. LASTOBOND Shield HT ( high temperature ) is a SBS-modified bitumen underlayment for use in approved steep slope assemblies, and is designed to withstand service temperatures up to 240°F (116°C).


Be the first to review this product. Cold-applie self-adhering membrane composed of a high -performance polymeric film with barrier properties along with an embosse slip-resistant surface. It is composed of two waterproofing materials—an innovative and proprietary rubberized asphalt adhesive combined with a high performance polymeric film with UV barrier properties. Protects Your Roofs from Ice Dams and Wind Driven Rain. Water is a home’s greatest enemy.


High temp ice and water shield

A premium, high temperature , mil, self-adhering membrane composed of a proprietary slip resistant film with a rubberized asphalt adhesive. Long-lasting waterproofing protection— Both the polyethylene film and the specially-formulated rubberized asphalt components create a water and moisture barrier that does not degrade from the effects of the environment. Yes, the air temperature , as well as direct sunlight, causes problems when installing ice and water shield. Upgraded roof underlayment is often specified in cold climates for additional protection against ice dam leakage, while high temperature underlayments are designed for use in high temperature environments where the in-service temperature can reach temperatures as high as 240ºF. Its proprietary and time tested rubberized asphalt formulation has been proven to form a watertight bond with the roof deck and to seal around fasteners used to.


Help Protect Your Home From Wind-Driven Rain And Damaging Ice Dams With A Leak Barrier. It had to withstand high temperatures without melting. The theory is that the copper panels will get blazing hot under the sun and cook the rubber underneath.


ALCO Shield SMOOTH protects roofing structures and the interior from water penetration caused by ice dams, wind driven rain seepage from around fasteners. ALCO Shield SMOOTH is a polymer modified asphalt membrane, fiberglass reinforce with a smooth, skid resistant, non-abrasive film surface. The underlayment protects against leaks and ice and water penetration in sloped-roof designs.


CCW WIP 300HT is a composite membrane consisting of rubberized asphalt laminated to an impermeable poly-ethylene film layer, providing dual-barrier moisture pro-tection.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.