Tuesday, August 13, 2019

Screen and recoat

Screen and recoat

A screen and recoat is the best-kept secret in the hardwood flooring world. Read on, and remember, the buffer is your friend. Many people mistakenly refer to the screen and recoat process as “buffing hardood floors. However, instead of a standard buffing pa a thin screen is used.


Screen and recoat

Procedures to professionally screen and recoat hardwood floors with a water based finish. Objective: Revitalize, bring back to life. What is a screen and recoat ? Screening and buffing are the same thing. They are synonyms for each other, and both mean that you scuff up or abrade the floor, and then you apply a coat of. The screen and recoat process can restore the glow of the floors and give them a refreshed look.


Please note that this article may contain affiliate links. You can read my full disclosure at the bottom of the page. Clean the floor with undiluted PoloPlaz Tie Tack. Normal tacking with this solution on a towel is sufficient. However, any concentrated areas of contamination can also be buffed with solution and a white pad – but do not apply excessive liquid on the floor.


But it shouldn’t be, because it can save you money, labor and time over the life of your hardwood floor. There are a few ways to abrade the floor but the most common method is to screen it with 1grit screen , this is called a dry- screen. This method simply cleans up the floor. A simple recoat can do a lot to make the floor look shinier.


Hardwood that is already damaged will benefit very little, if at all, by a screen and recoat. The dents, scratches, and discoloration will still be visible, despite the light sanding and new coat. Q: How do you know your gym floor needs screening and recoating ? A: Gym floor screening and recoating is preventative. It is a screening (mild abrasion) of the topcoat of finish in preparation for a new layer of topcoat urethane. A fresh coat of polyurethane is then applied.


Screens are mesh material coated in abrasives, so similar to sandpaper. Daily traffic and life’s events will bring this type of expected wear to any wood floor. Clean and re coat hardwood floors in lemont illinois buff recoat flawless flooring llc niketrainersuk com wood floor shine screen and recoat fine duletatic info floor interesting screen and recoat hardwood floors. Screen the entire floor with a 120-grit screen , changing as necessary.


A floor is properly screened when it is thoroughly deglossed. A maroon pad may be used after screening to reduce the presence of any swirl marks that might show up in the finish coats. Whether you need a screen and recoat or a complete sand.


Our floor maintenance department can help. We will bring your floor back to life! When it comes to bleachers, we can help you with preventative maintenance, safety inspections and repairs on your bleachers and backstops. The how of recoating hardwood floors is most commonly through a method called a screen and recoat.


To screen and recoat hardwood floors, you subject the floor to a very light abrasive. The second will screen and recoat with the satin finish. Questions are: Will the satin finish solve or at least help to some extent on the reflectivity problem? Both can screen and apply one coat oil based satin finish in a day.


The third contractor will take days and wants to remove all my baseboards and reinstall them for an additional $800. With a screen and recoat , the finished surface is lightly buffed using a screen to roughen up the finish surface. The mesh screen used is significantly less abrasive than sandpaper and works well to create a surface textured enough for a new coat of finish to stick to. Every year that passes, your hardwood wears down.


If you let it go too long, it wears so far that a full re-sanding and refinishing is required. This is much more expensive and more time consuming than an annual recoating. Not only will an annual screen and recoat remove topical marks and scuffs from your floors finish, but recoating your floor will also provide added protection for your hardwood flooring and paint.


Screen and recoat

Recoating saves your hardwood gym floor. Not all floor conditions are candidates for this process. Over a period of time the finish (wear layer) on a wood floor will wear and abrade.


When regular maintenance services do not maintain the desired level of finish, the floor may need to be refinished. If your test reveals weakening of the boards, you can still improve the finish by doing a screen and recoat. In this process, you use a floor buffer to scuff up the finish.


Unlike refinishing, you are not removing the original finish on the floor. You may recoat a floor to completely change the color of the finish, to retexture, or to simply reapply the same finish that was already on the floor. Complete refinishing: An extensive refinishing project, which includes sanding and application of several layers of finish, ranges from $to $per square foot. If your existing floor finish is simply dull or worn, Freshen Up offers a screen and recoat service.


This service includes a light sanding of your existing floor finish to remove accumulated dirt and prepare the surface to allow new polyurethane to properly adhere. If the joint gaps could be filled and not pop out, I would consider refinishing, but if not viable, a screen and recoat would dress it up. Screen with grit ,RO with grit around perimeter. Vac and apply two coats lacquer.


We do loads in one particular school. Price depends on mand quality of lacquer your recoating with. The unique formulation has exceptional gloss and outstanding application properties. For a screen and recoat , there is no need to remove your existing floor finish.


Instea you can simply screen the existing finish to prepare it for the addition of new finish.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.