Thursday, August 30, 2018

Veneer softener

This veneer softener is typically clear with a slight brown tint. Will this softener allow the veneer to bend in two directions? It is quite difficult (if not impossible) to apply a veneer to a project with curves on two planes - such as a the shape of a potato chip. Leave to the veneer to dry for twelve hours replacing the absorbent paper at regular intervals.


Veneer softener

Keep doing this until the veneer is completely dry as any softener still in the veneer may cause warping, cracking or splitting when creating the final product. PRO-GLUE WOOD VENEER SOFTENER is a ready-to-use veneer softener that has been specifically formulated to aid in veneer conditioning to flatten buckled or warpe straight grain, crotch and burl wood veneers , making them more workable, flexible, and easier to handle. Once the veneer has softened and brought to the correct MC, it should stay that way for several days depending on the conditions it will be stored under. This is a image on how flexible the veneer will be after veneer softener treatment.


By spraying Super-Soft on both sides of the veneer, it will temporarily plasticize the woo making it more pliable. I used an iron on medium heat instead of Marc’s technique to speed things up and had good. Use it on burls, crotches and any other highly figured veneers , to flatten, prevent splitting and make application easy.


Brush or spray it on, let it stand - minutes and then stack and let stand over night before using. Ungrammatically, veneer softener abbatial noncritical, came wood. This feature is not available right now. A quick way is to use some fabric softener and water. The perfect solution for making difficult veneers workable.


Use on raw wood veneers by brushing or spraying onto the surface. Softens and flattens brittle, buckle or curved veneers to allow easy use. Can anyone tell me more about GF-veneer softener ? Forum Responses GF-is diethylene glycol monoethyl ether. It works very well in flattening veneer.


Keep in mind that it will stick veneer together. Separate each sheet with a thin piece of MDF or masonite. I use a vacuum press to apply pressure. This adhesive modifier is used to treat burl, crotch and wavy veneers to prevent checking and splitting. Veneering kit with wood glue, veneer.


The softener plasticizes the cells and highly reduces tension. Neutral to adhesives, stains and finish coats. If the veneer is very dry and ripple it can crack in the pressing process.


Also, if it is being applied to a curved surface, like a raised panel door, it will not flow in the curved area without cracking. To solve this problem a veneer softener is used. Mix the softener with an equal amount of water before use. Working with dry or fragile veneers is a challenging undertaking, making good unpredictable and very hard to control.


The GF-temporarily plasticizes the cells of the veneer , making them more flexible and pliable. My bath is about parts water, parts alcohol, and part glycerin. Recommended procedure: Mix the GF-with water to a maximum of 1:dilution. The solution will soften the veneer and keep it flexible during glue up.


Spray your veneer to get it to relax and soften up. Press it between several sheets of newsprint. Change the paper every several hours until the veneer is flat and dry. Re: Flattening veneer Wetting venner tends to buckle it, and make it warp. You need a plasticizer to keep it from buckling.


Thats what commercial veneer softeners do. The glycerin acts as the plasticizer, and keeps the veneer unbuckled and pliable. It is a great technique and really makes burls much easier to work with.


Veneer softener

There is also some great discussion on how to flatten veneers using veneer softener and a vacuum bag. A concentrated plasticizing solution for use with brittle, wavy veneers. Use decreases and prevents cracks and checks when pressing. Especially useful with crotch and burls.


Helps flatten veneers too. Make up the mixture and soak the veneers one at a time for about 10mins, take them out and let the excess drain of. Press with fibre glass mesh and paper towels. The mesh stops the veneer sticking to the paper. The manufacturer claims We have heard of good from luthiers who use the softener to make some species of thin lumber more bendable.


Veneer softener

Look at the attached photo. This is the caption that goes with it from the manufacturer: How soft does it really make the veneer ? Ideal for use on face grade and dimensional veneer.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.