Watco wipe on poly

Beschichtungen für Industrieböden für innen oder außen! Fahrbahnschwellen, Kantenschutz. This is a super durable polyurethane solution that is easily hand rubbed onto wood to provide a strong, clear protective finish against water, stains, and rigorous wear and tear. Wipe on surfaces to get into areas that are difficult to reach with traditional brush-on polyurethane. But, where durability is a big concern and a client still wants a hand rubbed look then, I will use it.

Polyurethane protection with hand rubbed beauty! Apply or wipe on with a clean rag or dryish brush dipped in same. Leave a very thin coat and let dry hours.

Just wipe it on with a cloth - no need to worry about drips or brush marks. You may have to register before you can post: click the register link above to proceed. I have just completed a black walnut jewlery box.

I tried watco wipe on poly. I applied three coats so far. I put minwax wipe - on poly over Watco Danish oil all the time. The only caveat is that you need to let the oil dry really well first. Mainly just thinned a bit, since you can wipe on any poly by thinning it a bit yourself.

You might have read that Watco and Minwax Tung Oil Finish are the same thing. I would not say they are the same thing, but they both are a polymerized oil, and might even have a little tung oil in the mix. It provides the protection of a polyurethane finish that is easily hand-applied to wood. It provides a strong, clear protective finish against water, stains, and rigorous wear and tear. Watco wipe-on poly is most like the Minwax oil-based product.

Then wipe off the excess and let it dry overnight before recoating, or one week before applying a film finish. I thought a hand applied wipe on finish will be better for a relatively new guy like me. I’ve used Watco brush on lacquer before and was please with the , so I was hoping that their wipe on poly will be a decent product as well.

If so, a varnish finish is a must for its durability and water resistance. Wipe-On Poly works as a top coat for Danish oil finishes or any other stain:. Wipe on with a clean cloth to achieve a smooth even finish with no brush marks. for eletters today and get the latest techniques and how-to from Fine Woodworking, plus special offers. In our tests it wiped on easily, with no streaks, and dried without dust sticking to it.

Home Depot does not carry Minwax Wipe on Poly any more. They now sell Watco Wipe on Poly. I find the Watco is turning my cherry wood darker, and leaves a distinct oily smell when the finish is dry. Wipe on poly is an awesome product to use to add a layer of protection to your painted furniture. It’s easy and fast to apply, easy to clean up, and relatively inexpensive.

As a starting point, when deciding between an oil finish ( Watco Danish Oil) or a varnish finish (Minwax Wipe On Poly ), you must first determine if water protection is required for your project, like in the case of a coffee table. With Wipe - On Poly , you can easily protect furniture with intricate and ornamental designs, or with corners and crevices difficult to reach with a brush. It is recommended for use on interior furniture and intricate wood items. I often use poly on top of Watco oil and the are usually beautiful. I believed I screwed up again!

I attempted to apply minwax wipe on poly over a cherry bookcase top that I had applied Danish oil about weeks ago. I had forgotten why I stopped using wipe on poly products because no matter how I try I always get streaks. Re: Applying Wipe-on Poly over Watco Agree with what said above with a possible change or test next time around.

Minwax wipe - on Poly is a great product I have used many times for needing something reasonably price and readily available at your local hardware or box store. But, I prefer the more difficult to find General Finishes Arm-R-Seal (Green can). If you are looking for a glossy look, a wipe on poly is a good choice, but understand you will probably be putting on 4-coats, with sanding in between.

You also can do an oil finish first, wait 3-days to cure, then use a wipe on poly. Strongly recommend Watco Danish Oil - brush on to your fine wood object and let it soak in for mins. Brush on some more oil and wait mins more. Let dry for 2-days before applying Wipe - On Poly. I opted for a durable poly finish.

I started with a couple coats of Watco Danish Oil. So what you are really looking for is a simple wipe -on varnish to put over top of the shellac. I may end up doing wipe - on poly instea but I was hoping to do less sanding. Grease or oil can be removed using Watco Bio D - a solvent free degreaser.

WATCO Clear Wood Finishes. Galvanised metal should be treated with Watco Galvaprime or similar galvanised metal primer. Allow the metal to dry before coating. I was excited to try this stuff when I first saw it on the internet.

Responses to Hands-On: Watco Danish Oil – Cherry Finish. I used wipe - on poly over Watco Danish oil on my workbench, came out fine.