Two part wood bleach

But wood bleach lets you remove color from wood. But only one will remove the natural color from wood : a two-part wood bleach of sodium hydroxide (caustic soda) and hydrogen peroxide. Since two part wood bleach seems to have all but disappears from the market, I did some internet searching and found on the Forest Products Laboratory website that sodium hydroxide (ordinary lye or drain cleaner) plus hydrogen peroxide is the only bleach that will remove the natural pigment in wood. Prime (4-days) FREE Shipping on eligible orders. It appears that the only size available from this manufacturer is one gallon (for $83!).

Two-part wood bleach turns red oak bone-white, without obscuring the grain the way a pickling stain would. The top coat is water-based polyurethane. Each type will work on some colors and not on others. The trick in using any bleach is selecting the correct one for the stain. Used in combination together, these solutions react to the tannic acid in bare wood to produce lighter wood tones, and obtain conformity of color.

I demonstrate how to make a two part bleach for woodturnings from Lye and pool strength Hydrogen Peroxide. Credit for the recipe for wood. Use two - part chemical bleach to lighten wood.

Save part wood bleach to get e-mail alerts and updates on your eBay Feed. This powerful solution brightens, evens out color variations and brings out the authentic beauty of natural wood. You can find it in many places or order a pint system here. Does anyone know of anybody that still sells two part wood bleach ? I believe very few companies make it anymore, but I am hoping some ma and pop place might have it. It worked very good for urine stains on hardwood floors when you refinish them.

Regular bleach does not do the trick. The kit contains a two - part solution that’s mixed together for easy application, effective performance and exceptional. No, oxalic acid is a rust remover, not an effective wood bleach. To get your desired shade, you may go from chlorine to a peroxide-based two - part bleach. You may have to register before you can post: click the register link above to proceed.

This product is considered HAZMAT in the UPS shipping system and will be subject to the current $Hazardous Material fee from UPS. You can bleach the color out of most woods with a widely available bleach that comes in two containers. WOOD BLEACH ForGDH-Rev. Lite-N-Up is intended for professional use only.

It bleaches new or stripped wood to a lighter, more uniform color. Hoppe’s clients provide samples of the wood in question, and he makes sample boards to determine how much bleach and how many coats of stain to use. Sounds like changing the color of wood , a two part bleach is the best way to go.

Chlorine bleach (swimming pool) removes dye color and turns wood white. Oxalic Acid is for removing rust and water stains. So, happy to withdraw my suggestion. Two part will help remove the natural color of wood.

We recently became aware of a quality problem that is negatively affecting its performance. Part A is Sodium Hydroxide which opens up the woods pores and then reacts with the Hydrogen Peroxide in Part B. When your project is ready for bleach , wet the wood to raise the grain, let this dry and sand smooth. Apply 1-coats of wood bleach and let dry completely.

Repeat application of wood bleach until desired whiteness is achieved. Lightly sand with 2grit. Good news bad news on the bleach. Household bleach will lighten to a lesser degree and can be used to remove dyes if to much has been applied to a surface.

And two part bleach part hydrogen peroxide and part sodium hydroxide is the most powerful and most effective in lightening woods. Minor wood discolorations are a good candidate for this chemical but it is not really effective at removing major dark areas on hardwoods. Two - part commercial bleach is the most reliable of the available options. It is effective and economical but must still be used with a great deal of care.

This is a link to an interesting article about how to make your own part wood bleach and use it. It is quite hard to find wood bleach in the shops, and this method is cheaper to make. The - part wood bleach by Kleen-Strip, and sold at Lowes and Home Depot, will do a good job if you follow the directions. Or, you can sand away all of the surface wood that you have. There are three common methods for wood beaching: household bleach , oxalic aci or a two - part kit containing hydrogen peroxide and sodium hydroxide.

Choose a method based on the stain composition. Most experienced wood finishers use one of two different types of wood bleach : oxalic aci which comes in crystal form and must be mixed with water before use, or a two - part ready-mixed liquid. The powerful formula is formulated to brighten and bring out the.

Wood Bleach lightens new and stripped wood for a more uniform appearance.