Monday, February 29, 2016

Liming wax

Liming wax

The liming wax can be applied directly onto bare woo or will work on sealed or stained timber. Some woods will benefit from opening the grain with a wire brush before application. I used one tablespoon of paint for tablespoons of wax but this is definitely not an exact science. Watch as I walk you through the ceruse or limed wax finish process step-by-step.


Liming wax

With a very understated and elegant look, the cerused finish delightfully agrees with so many different decorating styles. For my first application I used a plastic spackle knife. I put a generous portion of wax on the end of the knife. Working in 4-6″ widths across the table, I pushed the wax into the grain and immediately came back and pulled off the excess with the clean side.


Prior to applying a limed finish, wood must be clean, dry and grease-free, and existing finishes completely removed. This liming wax oak wood chest “before and after” is brought to you in part by RYOBI Power Tools. Get the full tutorial on RYOBI Nation. For more liming wax projects, watch this tutorial on how to use liming wax. Can also be used to make vivid colors more pastel.


The limed finish isn’t just for unfinished wood. Spackle Knife (Plastic) Simple Green Cleaner. Amy Howard at Home Dark Antique Wax. Clean the surface with an all-purpose cleaner.


People use liming wax to add white to the grains of very porous woo like Red Oak, creating this gorgeous highlight in the grain. If you were to ask me what consistency liming wax has, I would say it reminds me of Noxema. Find great deals on eBay for liming wax.


Perfect for use on interior floors, doors, skirting boards, architraves, kitchen cabinet doors and more to achieve a traditional limed wax finish. See an in-depth step-by-step demonstra. Unlike regular wax , which is meant to highlight the moldings, liming wax highlights the wood grain to give it that white wash finish. Because liming wax has to penetrate the wood to the grain, I had to remove the top layer of sealer. The addition of wax to any finish really gives it that final sophisticated touch.


Liming wax is amazing stuff. The “white wash” finish is another term for liming. When liming a piece, you should start with using a wood with an open, loose grain, like oak. It will lighten and add a beautiful appearance to wood finished with Driftwood Weathering Wood Finish.


And our new soft wax formula is now easier than ever to work with. It’s one of the easiest way to achieve a white washed effect. So here’s the before photo of the candlestick I found at a thrift store.


It is suggested you test the wax on an inconspicuous area to test the. Reapply more wax from time to time on areas of the furniture that get a lot of wear. In the photo, the chair on the left is untouche while the chair on the right has had the liming wax applied. In this example, the boards were dyed using Briwax Water Based Wood Dyes. The red and blue dye was used to color the wood without stopping up the pores of the wood.


I used the liming wax on the board and the stand as you can see below. It was more difficult to apply to the stand because the wood was very rough. I like the board with the liming wax better than that orange stain. Amy has a lovely liming wax , but I used some liming wax I already had at home.


Remove the white haze using a cloth and Neutral Black Bison Paste Wax , or if a water-resistant finish is require with Liberon Finishing Oil. Allow to dry for minutes. It gave me just the look I was going for and couldn’t have been easier. There are two techniques that produce similar.


This is the liming wax brand I most use). For a low or medium traffic piece such as a side table or dressser, I prefer liming over cerusing. Shop Great Deals Online Now! Save On Hundreds Of Favorites. Day Returns, Same Day Shipping.


Instead of soaking into the paint, the wax sits on top of the surface. The first, and easiest, is using liming wax. The finish is created by filling deep pours in open grain timber with the liming wax.


A white wax used to create a limed effect on wood. Download Product Information Sheet. Ensure the surface is clean, dry and free from any previous finishes.


A smooth paste wax formulation to produce a white grained finish to bare or stained wood. Two hundred years ago this liming method was used to lighten the dark wood panels in various mansions of the day. This part was much more fun and exciting! I had never heard of liming wax before and came across several bloggers who used it for a rustic, whitewashed feel. I love the look of the white wax settling into the crevices and when thinned with paint thinner, gives wood a bleached in the sun feel.


Liming wax

So I used some mineral spirits to remove the liming wax from that area, and shellacked the whole table using Zinsser Clear Shellac. If you are a human and are seeing this fiel please leave it blank.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.