Monday, March 30, 2015

Scraping popcorn ceiling dry

This method is so much easier than using the water method. The damp popcorn is heavier and messier to clean up. For easier scraping and practically no dust during popcorn ceiling removal, use a garden pump sprayer to mist the ceiling and let it soak in for about minutes before scraping. Only give it a light misting—too much water could damage the drywall or loosen the joint tape.


In this video we go over DIY how to remove popcorn ceiling texture in a fast and easy way. This is how a lot of contractors do it with minimal mess and clean up. We did not cover the walls or. Hold the scraper at a very low angle - almost parallel with the ceiling. Push firmly, but if it fights you, add more water.


Popcorn Textured Ceilings – It’s Time for You to Go! At this point you may start to consider the dry textured ceiling method. In this Do It Yourself video tutorial series, I am explaining. Prime and Paint the Ceiling : Using a paint roller on an extendable handle, roll primer onto the entire ceiling. Lightly sand the ceiling to knock down any imperfections.


Scraping popcorn ceiling dry

Wipe off any sanding dust with a damp sponge. Paint the ceiling with two coats of a flat paint in your color choice. The popcorn ceiling had been painted at least once so rather than trying to remove it right down to the drywall, I just scraped the popcorn off and left the texture on the ceiling. A coat of primer and then a coat of satin paint makes the ceiling look really nice and modern. Painting a popcorn ceiling may seem daunting at first.


DIY expert Amy Matthews explains how to do it. It’s not simply about the place for placing many sorts of ceiling materials. Having fun while doing this job is something I have never come across. Try it dry first, then dampen the texture with water and try again. Some texture comes off easily without water, but in most cases wetting is best.


Scraping popcorn ceiling dry

Ceiling Texture Scraper features a unique bag attachment to help capture falling debris. It is designed to remove unwanted popcorn ceiling texture. The inch blade scrapes large areas - complete a room in minutes or less. After the ceiling has drie repair any damaged or uneven areas with drywall joint compound.


If there are any electrical boxes in the ceiling, you need to cover those as well. Use painter’s tape to keep the wiring dry. Mist the ceiling with a pump sprayer. To eliminate most of the dust that would get kicked up from scraping popcorn dry, you’ll first mist a four foot by four foot area of the ceiling with water.


Scraping the popcorn ceiling dry can make it go everywhere and take forever. This will make scraping easier and help keep it from flying all over the place and sticking to your furniture and curtains. Before you start scraping , use a spray bottle to make the popcorn wet. The bedroom ceiling had a popcorn ceiling covering up the holes, which I found out after scraping all the popcorn off.


The Dinning Room had holes, one from the light fixture being move and the other from a wood burning stove pipe that had been removed. Scraping popcorn ceiling services by certified contractors near you. An ambitious homeowner can remove popcorn ceilings with nothing more than a spray bottle, a wide scraper and plenty of plastic. This is the least-expensive way to remove texture from a ceiling , costing just $or so for tools at your local hardware store.


Ended up removing popcorn from our entire kitchen-dining-family-entry room that was painted (aren’t all ceilings painted?!) by scraping the ceiling while dry. No sanding, no patching, and painted the same day. But you want the solution to soak in. When done properly, the putty knife just slides across the ceiling , and it is easy to scrape the popcorn off.


Your time may be longer depending on age, amount and type of paint and total styrofoam content of the popcorn. With a smooth motion, scrape the ceiling with the scraper. If you run into any hard scraping areas, apply a little more water, wait and then try again.


The soak and scrape method is the way to go. An experienced drywaller will be in and out in less than a day. Floor and furniture covered up, popcorn ceiling scrapenew hand texture applied (repairing any damage) and repainted. Yes, popcorn ceilings are dated and went out of style years ago.


So, most new home owners are looking for ways to eliminate popcorn textured ceilings. You can solve this problem easily. Remove plastic and they are gone. Wash the entire ceiling with liquid TSP.


Because the texture is applied over the existing dry wall on the ceiling , it can peel off over time due to moisture, impact damage or simply old age. Scraping becomes easier if the air in the room is dry , as against when it contains moisture. Similarly, remove the popcorn from the remaining part of the ceiling. Repairing the New Ceiling : Once you finish off with the removal of popcorn from every part of ceiling , sand the ceiling using a pole sander. Repair the minor damages due to scraping.


It was popular in those decades to have stipple or popcorn ceilings : ceilings with a raised textured look.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.